Morphological influence of deposition routes on lead sulfide thin films
- Mlowe, Sixberth, Shombe, Ginena B, Akerman, Matthew P, Mubofu, Egid B, O'Brien, Paul, Mashazi, Philani N, Nyokong, Tebello, Revaprasadu, Neerish
- Authors: Mlowe, Sixberth , Shombe, Ginena B , Akerman, Matthew P , Mubofu, Egid B , O'Brien, Paul , Mashazi, Philani N , Nyokong, Tebello , Revaprasadu, Neerish
- Date: 2019
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/186780 , vital:44533 , xlink:href="https://doi.org/10.1016/j.ica.2019.119116"
- Description: A distorted single crystal structure of bis(piperidinedithiocarbamato)lead(II) complex and its subsequent use to deposit thin films is reported. Two deposition routes namely, aerosol-assisted chemical vapour deposition (AACVD) and spin coating deposition have been employed to obtain anisotropic lead sulfide (PbS) nanostructures. The thin films displayed rod to cubic shaped crystals for AACVD, and a range of cubes, star and dendritic morphologies with variation of temperatures were displayed for spin coated films. Optical band gaps between 1.32 and 1.55 eV as controlled by the change in temperature were observed for thin films deposited by AACVD. Powder X-ray diffraction (P-XRD) studies show that the films formed are composed of cubic crystalline PbS. The X-ray photoelectron spectroscopy (XPS) was used to investigate the effect of activation temperatures (350, 400 and 450 °C) on the chemical composition and oxidation states of PbS samples.
- Full Text:
- Date Issued: 2019
- Authors: Mlowe, Sixberth , Shombe, Ginena B , Akerman, Matthew P , Mubofu, Egid B , O'Brien, Paul , Mashazi, Philani N , Nyokong, Tebello , Revaprasadu, Neerish
- Date: 2019
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/186780 , vital:44533 , xlink:href="https://doi.org/10.1016/j.ica.2019.119116"
- Description: A distorted single crystal structure of bis(piperidinedithiocarbamato)lead(II) complex and its subsequent use to deposit thin films is reported. Two deposition routes namely, aerosol-assisted chemical vapour deposition (AACVD) and spin coating deposition have been employed to obtain anisotropic lead sulfide (PbS) nanostructures. The thin films displayed rod to cubic shaped crystals for AACVD, and a range of cubes, star and dendritic morphologies with variation of temperatures were displayed for spin coated films. Optical band gaps between 1.32 and 1.55 eV as controlled by the change in temperature were observed for thin films deposited by AACVD. Powder X-ray diffraction (P-XRD) studies show that the films formed are composed of cubic crystalline PbS. The X-ray photoelectron spectroscopy (XPS) was used to investigate the effect of activation temperatures (350, 400 and 450 °C) on the chemical composition and oxidation states of PbS samples.
- Full Text:
- Date Issued: 2019
The effect of the cobalt and manganese central metal ions on the nonlinear optical properties of tetra (4-propargyloxyphenoxy) phthalocyanines
- Mwanza, Daniel, Louzada, Marcel, Britton, Jonathan, Sekhosana, Kutloano E, Khene, Samson M, Nyokong, Tebello, Mashazi, Philani N
- Authors: Mwanza, Daniel , Louzada, Marcel , Britton, Jonathan , Sekhosana, Kutloano E , Khene, Samson M , Nyokong, Tebello , Mashazi, Philani N
- Date: 2018
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/233357 , vital:50083 , xlink:href="https://doi.org/10.1039/C8NJ00748A"
- Description: The metal-free (H2TPrOPhOPc), cobalt (CoTPrOPhOPc) and manganese (Mn(OAc)TPrOPhOPc) tetra propargyloxyphenoxy phthalocyanines were evaluated for their potential as optical limiting materials. The effect of the substituents and the central metal ions on the nonlinear optical properties was evaluated. The metal-free phthalocyanine exhibited better nonlinear optical properties when compared to the cobalt and manganese complexes owing to the metal ions quenching the excited state due to their half-filled d-orbitals. The nonlinear absorption coefficient (βeff, ×10−5 m MW−1) followed the trend of H2TPrOPhOPc > CoTPrOPhOPc > Mn(OAc)TPrOPhOPc. The values βeff (×10−5 m MW−1) using 532 nm Nd:YAG (560 nm monochromatic Ekspla) laser sources were 23.5 > 14.3 > 9.20 (14.4). The second-order nonlinear coefficient obtained using density functional theory calculations, the theoretical hyper-Rayleigh scattering (βHRS, ×10−28 esu), showed the decreasing trend for H2TPrOPhOPc (2.28) > CoTPrOPhOPc (2.10) > Mn(OAc)TPrOPhOPc (1.86). The 4-(propargyloxy)phenoxy substituents enhanced the optical limiting properties of the synthesized phthalocyanines.
- Full Text:
- Date Issued: 2018
- Authors: Mwanza, Daniel , Louzada, Marcel , Britton, Jonathan , Sekhosana, Kutloano E , Khene, Samson M , Nyokong, Tebello , Mashazi, Philani N
- Date: 2018
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/233357 , vital:50083 , xlink:href="https://doi.org/10.1039/C8NJ00748A"
- Description: The metal-free (H2TPrOPhOPc), cobalt (CoTPrOPhOPc) and manganese (Mn(OAc)TPrOPhOPc) tetra propargyloxyphenoxy phthalocyanines were evaluated for their potential as optical limiting materials. The effect of the substituents and the central metal ions on the nonlinear optical properties was evaluated. The metal-free phthalocyanine exhibited better nonlinear optical properties when compared to the cobalt and manganese complexes owing to the metal ions quenching the excited state due to their half-filled d-orbitals. The nonlinear absorption coefficient (βeff, ×10−5 m MW−1) followed the trend of H2TPrOPhOPc > CoTPrOPhOPc > Mn(OAc)TPrOPhOPc. The values βeff (×10−5 m MW−1) using 532 nm Nd:YAG (560 nm monochromatic Ekspla) laser sources were 23.5 > 14.3 > 9.20 (14.4). The second-order nonlinear coefficient obtained using density functional theory calculations, the theoretical hyper-Rayleigh scattering (βHRS, ×10−28 esu), showed the decreasing trend for H2TPrOPhOPc (2.28) > CoTPrOPhOPc (2.10) > Mn(OAc)TPrOPhOPc (1.86). The 4-(propargyloxy)phenoxy substituents enhanced the optical limiting properties of the synthesized phthalocyanines.
- Full Text:
- Date Issued: 2018
“Turn on” fluorescence enhancement of Zn octacarboxyphthaloyanine-graphene oxide conjugates by hydrogen peroxide
- Shumba, Munyaradzi, Mashazi, Philani N, Nyokong, Tebello
- Authors: Shumba, Munyaradzi , Mashazi, Philani N , Nyokong, Tebello
- Date: 2016
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/190438 , vital:44994 , xlink:href="https://doi.org/10.1016/j.jlumin.2015.11.001"
- Description: Zn octacarboxy phthalocyanine-reduced graphene oxide or graphene oxide conjugates were characterized by absorption spectroscopy, transmission electron microscopy, fluorescence spectroscopy, X-ray diffraction, thermo gravimetric analysis and X-ray photon spectroscopy. The presence of reduced graphene oxide or graphene oxide resulted in the quenching (turn on) of Zn octacarboxy phthalocyanine fluorescence which can be explained by photoinduced electron transfer. Zn octacarboxy phthalocyaninereduced graphene oxide or graphene oxide conjugates “turned on” fluorescence showed a linear response to hydrogen peroxide hence their potential to be used as sensors. The nanoprobe developed showed high selectivity towards hydrogen peroxide in the presence of physiological interferences.
- Full Text:
- Date Issued: 2016
- Authors: Shumba, Munyaradzi , Mashazi, Philani N , Nyokong, Tebello
- Date: 2016
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/190438 , vital:44994 , xlink:href="https://doi.org/10.1016/j.jlumin.2015.11.001"
- Description: Zn octacarboxy phthalocyanine-reduced graphene oxide or graphene oxide conjugates were characterized by absorption spectroscopy, transmission electron microscopy, fluorescence spectroscopy, X-ray diffraction, thermo gravimetric analysis and X-ray photon spectroscopy. The presence of reduced graphene oxide or graphene oxide resulted in the quenching (turn on) of Zn octacarboxy phthalocyanine fluorescence which can be explained by photoinduced electron transfer. Zn octacarboxy phthalocyaninereduced graphene oxide or graphene oxide conjugates “turned on” fluorescence showed a linear response to hydrogen peroxide hence their potential to be used as sensors. The nanoprobe developed showed high selectivity towards hydrogen peroxide in the presence of physiological interferences.
- Full Text:
- Date Issued: 2016
“Turn on” fluorescence enhancement of Zn octacarboxyphthaloyanine-graphene oxide conjugates by hydrogen peroxide
- Shumba, Munyaradzi, Mashazi, Philani N, Nyokong, Tebello
- Authors: Shumba, Munyaradzi , Mashazi, Philani N , Nyokong, Tebello
- Date: 2016
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/240875 , vital:50881 , xlink:href="https://doi.org/10.1016/j.jlumin.2015.11.001"
- Description: Zn octacarboxy phthalocyanine-reduced graphene oxide or graphene oxide conjugates were characterized by absorption spectroscopy, transmission electron microscopy, fluorescence spectroscopy, X-ray diffraction, thermo gravimetric analysis and X-ray photon spectroscopy. The presence of reduced graphene oxide or graphene oxide resulted in the quenching (turn on) of Zn octacarboxy phthalocyanine fluorescence which can be explained by photoinduced electron transfer. Zn octacarboxy phthalocyanine-reduced graphene oxide or graphene oxide conjugates “turned on” fluorescence showed a linear response to hydrogen peroxide hence their potential to be used as sensors. The nanoprobe developed showed high selectivity towards hydrogen peroxide in the presence of physiological interferences.
- Full Text:
- Date Issued: 2016
- Authors: Shumba, Munyaradzi , Mashazi, Philani N , Nyokong, Tebello
- Date: 2016
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/240875 , vital:50881 , xlink:href="https://doi.org/10.1016/j.jlumin.2015.11.001"
- Description: Zn octacarboxy phthalocyanine-reduced graphene oxide or graphene oxide conjugates were characterized by absorption spectroscopy, transmission electron microscopy, fluorescence spectroscopy, X-ray diffraction, thermo gravimetric analysis and X-ray photon spectroscopy. The presence of reduced graphene oxide or graphene oxide resulted in the quenching (turn on) of Zn octacarboxy phthalocyanine fluorescence which can be explained by photoinduced electron transfer. Zn octacarboxy phthalocyanine-reduced graphene oxide or graphene oxide conjugates “turned on” fluorescence showed a linear response to hydrogen peroxide hence their potential to be used as sensors. The nanoprobe developed showed high selectivity towards hydrogen peroxide in the presence of physiological interferences.
- Full Text:
- Date Issued: 2016
Characterization of electrodes modified by one pot or step by step electro-click reaction and axial ligation of iron tetracarboxyphthalocyanine
- Maringa, Audacity, Mashazi, Philani N, Nyokong, Tebello
- Authors: Maringa, Audacity , Mashazi, Philani N , Nyokong, Tebello
- Date: 2014
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/193892 , vital:45403 , xlink:href="https://doi.org/10.1016/j.electacta.2014.09.011"
- Description: The modification of the glassy carbon electrode (GCE) was carried out using two methods. The first method is simultaneous electropolymerization and electro-click followed by immersion into a solution of dimethyl formamide (DMF) containing FeTCPc. The second method is step by step whereby electropolymerization is carried out first followed by electro-click and then immersion into a DMF solution containing FeTCPc. From the electrochemical characterization, it was observed that the second route (step by step method) was the best as indicated by the ferricyanide studies (cyclic voltammetry and scanning electrochemical microscopy). In the electrooxidation of hydrazine, we obtained a potential of 0.26 V. Of interest were the detection limit of 6.4 μM and the catalytic rate constant of 2.1 × 109 cm3 mol−1 s−1. This shows that the sensor can be used for the electrooxidation of hydrazine.
- Full Text:
- Date Issued: 2014
- Authors: Maringa, Audacity , Mashazi, Philani N , Nyokong, Tebello
- Date: 2014
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/193892 , vital:45403 , xlink:href="https://doi.org/10.1016/j.electacta.2014.09.011"
- Description: The modification of the glassy carbon electrode (GCE) was carried out using two methods. The first method is simultaneous electropolymerization and electro-click followed by immersion into a solution of dimethyl formamide (DMF) containing FeTCPc. The second method is step by step whereby electropolymerization is carried out first followed by electro-click and then immersion into a DMF solution containing FeTCPc. From the electrochemical characterization, it was observed that the second route (step by step method) was the best as indicated by the ferricyanide studies (cyclic voltammetry and scanning electrochemical microscopy). In the electrooxidation of hydrazine, we obtained a potential of 0.26 V. Of interest were the detection limit of 6.4 μM and the catalytic rate constant of 2.1 × 109 cm3 mol−1 s−1. This shows that the sensor can be used for the electrooxidation of hydrazine.
- Full Text:
- Date Issued: 2014
Design and evaluation of an electrochemical immunosensor for measles serodiagnosis using measles-specific Immunoglobulin G antibodies
- Mashazi, Philani N, Vilakazi, Sibulelo, Nyokong, Tebello
- Authors: Mashazi, Philani N , Vilakazi, Sibulelo , Nyokong, Tebello
- Date: 2013
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/241705 , vital:50962 , xlink:href="https://doi.org/10.1016/j.talanta.2013.06.036"
- Description: The design of electrochemical immunosensors for the detection of measles-specific antibodies is reported. The measles-antigen modified surface was used as an antibody capture surface. The detection of measles-specific IgG antibodies was accomplished using the voltammetric method and horse-radish peroxidase (HRP) labeled secondary antibody (anti-IgG) as a detecting antibody. The potential applications of the designed immunosensor were evaluated in buffer and serum solutions. The immunosensor exhibited good linearity at concentrations less than 100 ng mL−1 with R2=0.997 and the limit of detection of 6.60 ng mL−1 at 3σ. The potential application of the immunosensor was evaluated in the deliberately infected human and newborn calf serum samples with measles-IgG antibody mimicking real-life samples. The designed electrochemical immunosensor could differentiate between infected and un-infected serum samples as higher catalytic currents were obtained for infected serum samples.
- Full Text:
- Date Issued: 2013
- Authors: Mashazi, Philani N , Vilakazi, Sibulelo , Nyokong, Tebello
- Date: 2013
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/241705 , vital:50962 , xlink:href="https://doi.org/10.1016/j.talanta.2013.06.036"
- Description: The design of electrochemical immunosensors for the detection of measles-specific antibodies is reported. The measles-antigen modified surface was used as an antibody capture surface. The detection of measles-specific IgG antibodies was accomplished using the voltammetric method and horse-radish peroxidase (HRP) labeled secondary antibody (anti-IgG) as a detecting antibody. The potential applications of the designed immunosensor were evaluated in buffer and serum solutions. The immunosensor exhibited good linearity at concentrations less than 100 ng mL−1 with R2=0.997 and the limit of detection of 6.60 ng mL−1 at 3σ. The potential application of the immunosensor was evaluated in the deliberately infected human and newborn calf serum samples with measles-IgG antibody mimicking real-life samples. The designed electrochemical immunosensor could differentiate between infected and un-infected serum samples as higher catalytic currents were obtained for infected serum samples.
- Full Text:
- Date Issued: 2013
Synthesis, density functional theory, molecular dynamics and electrochemical studies of 3-thiopheneacetic acid-capped gold nanoparticles
- Sosibo, Ndabenhle M, Mdluli, Phumlane S, Mashazi, Philani N, Dyan, Busiswa, Revaprasadu, Neerish, Nyokong, Tebello, Tshikhudo, Robert T, Skepu, Amanda, Van Der Lingen, Elma
- Authors: Sosibo, Ndabenhle M , Mdluli, Phumlane S , Mashazi, Philani N , Dyan, Busiswa , Revaprasadu, Neerish , Nyokong, Tebello , Tshikhudo, Robert T , Skepu, Amanda , Van Der Lingen, Elma
- Date: 2012
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/246446 , vital:51477 , xlink:href="https://doi.org/10.1016/j.molstruc.2011.09.057"
- Description: Gold nanoparticles capped with a bifunctional ligand, 3-thiopheneacetic acid (3-TAA) were synthesised by borohydride reduction at room temperature. The transmission electron microscopy (TEM) analysis showed that the particle aggregates and had semi-linear partial linkages that could be attributed to multi-modal binding of the ligand with various gold nanoparticles through the terminal thiolether (–S–) group and oxygen of the carboxylic (–COOH) group. This bimodal interaction led to limited stability of the resultant nanoparticles when tested using highly electrolytic media. To investigate further, density functional theory (DFT) quantum chemical and molecular dynamic calculations were conducted. The energetically favorable binding modes of the ligand to gold nanoparticle surfaces using the Gaussian program were studied. The DFT results showed kinetic stability of Au–3-TAA–Au interactions leading to inter-particle coupling or aggregation. Electrochemical analysis of the resultant nature of the capping agent revealed that 3-thiopheneacetic acid did not form a polymer during the preparation of Au–3-TAA. The cyclic voltammograms of Au–3-TAA nanoparticles coated glassy carbon electrode showed a typical gold character with the oxidation and reduction peaks at 1.4 V and 0.9 V, respectively.
- Full Text:
- Date Issued: 2012
- Authors: Sosibo, Ndabenhle M , Mdluli, Phumlane S , Mashazi, Philani N , Dyan, Busiswa , Revaprasadu, Neerish , Nyokong, Tebello , Tshikhudo, Robert T , Skepu, Amanda , Van Der Lingen, Elma
- Date: 2012
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/246446 , vital:51477 , xlink:href="https://doi.org/10.1016/j.molstruc.2011.09.057"
- Description: Gold nanoparticles capped with a bifunctional ligand, 3-thiopheneacetic acid (3-TAA) were synthesised by borohydride reduction at room temperature. The transmission electron microscopy (TEM) analysis showed that the particle aggregates and had semi-linear partial linkages that could be attributed to multi-modal binding of the ligand with various gold nanoparticles through the terminal thiolether (–S–) group and oxygen of the carboxylic (–COOH) group. This bimodal interaction led to limited stability of the resultant nanoparticles when tested using highly electrolytic media. To investigate further, density functional theory (DFT) quantum chemical and molecular dynamic calculations were conducted. The energetically favorable binding modes of the ligand to gold nanoparticle surfaces using the Gaussian program were studied. The DFT results showed kinetic stability of Au–3-TAA–Au interactions leading to inter-particle coupling or aggregation. Electrochemical analysis of the resultant nature of the capping agent revealed that 3-thiopheneacetic acid did not form a polymer during the preparation of Au–3-TAA. The cyclic voltammograms of Au–3-TAA nanoparticles coated glassy carbon electrode showed a typical gold character with the oxidation and reduction peaks at 1.4 V and 0.9 V, respectively.
- Full Text:
- Date Issued: 2012
- «
- ‹
- 1
- ›
- »