Showing items 1 - 6 of 6

Your selections:

An evaluation of synergistic interactions between feruloyl esterases and xylanases during the hydrolysis of various pre-treated agricultural residues

  • Authors: Mkabayi, Lithalethu
  • Date: 2021-04
  • Subjects: Esterases , Xylanases , Hydrolysis , Agricultural wastes -- Recycling , Enzymes , Lignocellulose -- Biodegradation , Escherichia coli , Oligosaccharides , Hydroxycinnamic acids
  • Language: English
  • Type: thesis , text , Doctoral , PhD
  • Identifier: http://hdl.handle.net/10962/178224 , vital:42922 , 10.21504/10962/178224
  • Description: Agricultural residues are readily available and inexpensive renewable resources that can be used as raw materials for the production of value-added chemicals. The application of enzymes to facilitate the degradation of agricultural residues has long been considered the most environmentally friendly strategy for converting this material into good quality value-added chemicals. However, agricultural residues are typically lignocellulosic in composition and recalcitrant to enzymatic hydrolysis. Due to this recalcitrant nature, the complete degradation of biomass residues requires the synergistic action of a broad range of enzymes. The development and optimisation of synergistic enzyme cocktails is an effective approach for achieving high hydrolysis efficiency of lignocellulosic biomass. The aim of the current study was to evaluate the synergistic interactions between two termite metagenome-derived feruloyl esterases (FAE6 and FAE5) and endo-xylanases for the production of hydroxycinnamic acids and xylo-oligosaccharides (XOS) from model substrates, and untreated and pre-treated agricultural residues. Firstly, the two fae genes were heterologously expressed in Escherichia coli, and the recombinant enzymes were purified to homogeneity. The biochemical properties of the purified recombinant FAEs and xylanases (XT6 and Xyn11) were then assessed to determine the factors which influenced their activities and to select suitable operating conditions for synergy studies. An optimal protein loading ratio of xylanases to FAEs required to maximise the release of both reducing sugar and ferulic acid (FA) was established using 0.5% (w/v) insoluble wheat arabinoxylan (a model substrate). The enzyme combination of 66% xylanase and 33% FAE (on a protein loading basis) produced the highest amounts of reducing sugars and FA. The enzyme combination of XT6 (GH10 xylanase) and FAE5 or FAE6 liberated the highest amount of FA while a combination of Xyn11 (GH11 xylanase) and FAE5 or FAE6 produced the highest reducing sugar content. The synergistic interactions which were established between the xylanases and FAEs were further investigated using agricultural residues (corn cobs, rice straw and sugarcane bagasse). The three substrates were subjected to hydrothermal and dilute acid pre-treatment prior to synergy studies. It is generally known that, during pre-treatment, many compounds can be produced which may influence enzymatic hydrolysis. The effects of these by-products were assessed and it was found that lignin and its degradation products were the most inhibitory to the FAEs. The optimised enzyme cocktail was then applied to 1% (w/v) of untreated and pre-treated substrates for the efficient production of XOS and hydroxycinnamic acids. A significant improvement in xylanase substrate degradation was observed, especially with the combination of 66% Xyn11 and 33% FAE6 which displayed an improvement in reducing sugars of approximately 1.9-fold and 3.4-fold for hydrothermal and acid pre-treated corn cobs (compared to when Xyn11 was used alone), respectively. The study demonstrated that pre-treatment substantially enhanced the enzymatic hydrolysis of corn cobs and rice straw. Analysis of the hydrolysate product profiles revealed that the optimised enzyme cocktail displayed great potential for releasing XOS with a low degree of polymerisation. In conclusion, this study provided significant insights into the mechanism of synergistic interactions between xylanases and metagenome-derived FAEs during the hydrolysis of various substrates. The study also demonstrated that optimised enzyme cocktails combined with low severity pre-treatment can facilitate the potential use of xylan-rich lignocellulosic biomass for the production of valuable products in the future. , Thesis (PhD) -- Faculty of Science, Biochemistry and Microbiology, 2021
  • Full Text:
  • Date Issued: 2021-04

Nanofiber immobilized cellulases and hemicellulases for fruit waste beneficiation

A lignocellulolytic enzyme system for fruit waste degradation : commercial enzyme mixture synergy and bioreactor design

  • Authors: Gama, Repson
  • Date: 2014
  • Subjects: Enzymes -- Biotechnology , Enzymes -- Industrial applications , Lignocellulose -- Biodegradation , Biomass energy , Biomass conversion , Biochemical engineering , Agricultural wastes as fuel
  • Language: English
  • Type: Thesis , Doctoral , PhD
  • Identifier: vital:4114 , http://hdl.handle.net/10962/d1013073
  • Description: Studies into sources of alternative liquid transport fuel energy have identified agro-industrial wastes, which are lignocellulosic in nature, as a potential feedstock for biofuel production against the background of depleting nonrenewable fossil fuels. In South Africa, large quantities of apple and other fruit wastes, called pomace, are generated from fruit and juice industries. Apple pomace is a rich source of cellulose, pectin and hemicellulose, making it a potential target for utilisation as a lignocellulosic feedstock for biofuel and biorefinery chemical production. Lignocellulosic biomass is recalcitrant in nature and therefore its degradation requires the synergistic action of a number of enzymes such as cellulases, hemicellulases, pectinases and ligninases. Commercial enzyme cocktails, containing some of these enzymes, are available and can be used for apple pomace degradation. In this study, the degradation of apple pomace using commercial enzyme cocktails was investigated. The main focus was the optimisation of the release of sugar monomers that could potentially be used for biofuel and biorefinery chemical production. There is no or little information reported in literature on the enzymatic degradation of fruit waste using commercial enzyme mixtures. This study first focused on the characterisation of the substrate (apple pomace) and the commercial enzyme cocktails. Apple pomace was found to contain mainly glucose, galacturonic acid, arabinose, galactose, lignin and low amounts of xylose and fructose. Three commercial enzyme cocktails were initially selected: Biocip Membrane, Viscozyme L (from Aspergillus aculeatus) and Celluclast 1.5L (a Trichoderma reesei ATCC 26921 cellulase preparation). The selection of the enzymes was based on activities declared by the manufacturers, cost and local availability. The enzymes were screened based on their synergistic cooperation in the degradation of apple pomace and the main enzymes present in each cocktail. Viscozyme L and Celluclast 1.5L, in a 50:50 ratio, resulted in the best degree of synergy (1.6) compared to any other combination. The enzyme ratios were determined on Viscozyme L and Celluclast 1.5L based on the protein ratio. Enzyme activity was determined as glucose equivalents using the dinitrosalicylic acid (DNS) method. Sugar monomers were determined using Megazyme assay kits. There is limited information available on the enzymes present in the commercial enzyme cocktails. Therefore, the main enzymes present in Viscozyme L and Celluclast 1.5L were identified using different substrates, each targeted for a specific enzyme and activity. Characterisation of the enzyme mixtures revealed a large number of enzymes required for apple pomace degradation and these included cellulases, pectinases, xylanases, arabinases and mannanases in different proportions. Viscozyme L contained mainly pectinases and hemicellulases, while Celluclast 1.5L displayed largely cellulase and xylanase activity, hence the high degree of synergy reported. The temperature optimum was 50ºC for both enzyme mixtures and pH optima were observed at pH 5.0 and pH 3.0 for Viscozyme L and Celluclast 1.5L, respectively. At 37ºC and pH 5.0, the enzymes retained more that 90% activity after 15 days of incubation, allowing the enzymes to be used together with less energy input. The enzymes were further characterised by determining the effect of various compounds, such as alcohols, sugars, phenolic compounds and metal ions at various concentrations on the activity of the enzymes during apple pomace hydrolysis. Apart from lignin, which had almost no effect on enzyme activity, all the compounds caused inhibition of the enzymes to varying degrees. The most inhibitory compounds were some organic acids and metal ions, as well as cellobiose and xylobiose. Using the best ratio for Viscozyme L and Celluclast 1.5L (50:50) for the hydrolysis of apple pomace, it was observed that synergy was highest at the initial stages of hydrolysis and decreased over time, though the sugar concentration increased. The type of synergy for optimal apple pomace hydrolysis was found to be simultaneous. There was no synergy observed between Viscozyme L and Celluclast 1.5L with ligninases - laccase, lignin peroxidase and manganese peroxidase. Hydrolysing apple pomace with ligninases prior to addition of Viscozyme L and Celluclast 1.5L did not improve degradation of the substrate. Immobilisation of the enzyme mixtures on different supports was performed with the aim of increasing stability and enabling reuse of the enzymes. Immobilisation methods were selected based on the chemical properties of the supports, availability, cost and applicability on heterogeneous and insoluble substrate like apple pomace. These methods included crosslinked enzyme aggregates (CLEAs), immobilisation on various supports such as nylon mesh, nylon beads, sodium alginate beads, chitin and silica gel beads. The immobilisation strategies were unsuccessful, mainly due to the low percentage of immobilisation of the enzyme on the matrix and loss of activity of the immobilised enzyme. Free enzymes were therefore used for the remainder of the study. Hydrolysis conditions for apple pomace degradation were optimised using different temperatures and buffer systems in 1 L volumes mixed with compressed air. Hydrolysis at room temperature, using an unbuffered system, gave a better performance as compared to a buffered system. Reactors operated in batch mode performed better (4.2 g/L (75% yield) glucose and 16.8 g/L (75%) reducing sugar) than fed-batch reactors (3.2 g/L (66%) glucose and 14.6 g/L (72.7% yield) reducing sugar) over 100 h using Viscozyme L and Celluclast 1.5L. Supplementation of β- glucosidase activity in Viscozyme L and Celluclast 1.5L with Novozyme 188 resulted in a doubling of the amount of glucose released. The main products released from apple pomace hydrolysis were galacturonic acid, glucose and arabinose and low amounts of galactose and xylose. These products are potential raw materials for biofuel and biorefinery chemical production. An artificial neural network (ANN) model was successfully developed and used for predicting the optimum conditions for apple pomace hydrolysis using Celluclast 1.5L, Viscozyme L and Novozyme 188. Four main conditions that affect apple pomace hydrolysis were selected, namely temperature, initial pH, enzyme loading and substrate loading, which were taken as inputs. The glucose and reducing sugars released as a result of each treatment and their combinations were taken as outputs for 1–100 h. An ANN with 20, 20 and 6 neurons in the first, second and third hidden layers, respectively, was constructed. The performance and predictive ability of the ANN was good, with a R² of 0.99 and a small mean square error (MSE). New data was successfully predicted and simulated. Optimal hydrolysis conditions predicted by ANN for apple pomace hydrolysis were at 30% substrate (wet w/v) and an enzyme loading of 0.5 mg/g and 0.2 mg/mL of substrate for glucose and reducing sugar, respectively, giving sugar concentrations of 6.5 mg/mL and 28.9 mg/mL for glucose and reducing sugar, respectively. ANN showed that enzyme and substrate loadings were the most important factors for the hydrolysis of apple pomace.
  • Full Text:
  • Date Issued: 2014

Lignocellulosic waste degradation using enzyme synergy with commercially available enzymes and Clostridium cellulovorans XylanaseA and MannanaseA

  • Authors: Morrison, David Graham
  • Date: 2014
  • Subjects: Lignocellulose -- Biodegradation , Enzymes -- Biotechnology , Agricultural wastes as fuel , Polysaccharides -- Biotechnology , Sugar -- Inversion , Clostridium , Xylanases , Monomers
  • Language: English
  • Type: Thesis , Masters , MSc
  • Identifier: vital:4119 , http://hdl.handle.net/10962/d1013292
  • Description: The launch of national and international initiatives to reduce pollution, reliance on fossil fuels and increase the beneficiation of agricultural wastes has prompted research into sugar monomer production from lignocellulosic wastes. These sugars can subsequently be used in the production of biofuels and environmentally degradable plastics. This study investigated the use of synergistic combinations of commercial and pure enzymes to lower enzyme costs and loadings, while increasing enzyme activity in the hydrolysis of agricultural waste. Pineapple pomace was selected due to its current underutilisation and the substantial quantities of it produced annually, as a by-product of pineapple canning. One of the primary costs in beneficiating agricultural wastes, such as pineapple pomace, is the high cost of enzyme solutions used to generate reducing sugars. This can be lowered through the use of synergistic combinations of enzymes. Studies related to the inclusion of hemicellulose degrading enzymes with commercial enzyme solutions have been limited and investigation of these solutions in select combinations, together with pineapple pomace substrate, allows for novel research. The use of synergistic combinations of purified cellulosomal enzymes has previously been shown to be effective at releasing reducing sugars from agricultural wastes. For the present study, MannanaseA and XylanaseA from Clostridium cellulovorans were heterologously expressed in Escherichia coli BL21 (DE3) cells and purified with immobilised metal affinity chromatography. These enzymes, in addition to two commercially available enzyme solutions (Celluclast 1.5L® and Pectinex® 3XL), were assayed on defined polysaccharides that are present in pineapple pomace to determine their substrate specificities. The degree(s) of synergy and specific activities of selected combinations of these enzymes were tested under both simultaneous and sequential conditions. It was observed that several synergistic combinations of enzyme solutions in select ratios, such as C20P60X20 (20% cellulose, 60% pectinase and 20% xylanse), C20P40X40 (20% cellulose, 40% pectinase and 40% xylanase) and C20P80 (20% cellulose, 80% pectinase) with pineapple pomace could both decrease the protein loading, while raising the level of activity compared to individual enzyme solutions. The highest quantity of reducing sugars to protein weight used on pineapple pomace was recorded at 3, 9 and 18 hours with combinations of Pectinex® 3XL and Celluclast 1.5L®, but for 27 h it was combinations of both these commercial solutions with XynA. The contribution of XynA was significant as C20P60X20 displayed the second highest reducing sugar production of 1.521 mg/mL, at 36 h from 12.875 μg/mL of protein, which was the second lowest protein loading. It was also shown that certain enzyme combinations, such as Pectinex® 3XL, Celluclast 1.5L® and XynA, did not generate synergy when combined in solution at the initial stages of hydrolysis, and instead generated a form of competition called anti-synergy. This was due to Pectinex® 3XL which had anti-synergy relationships in select combinations with the other enzyme solutions assayed. It was also observed that the degree of synergy and specific activity for a combination changed over time. Some solutions displayed the highest levels of synergy at the commencement of hydrolysis, namely Celluclast 1.5L®, ManA and XynA. Other combinations exhibited the highest levels of synergy at the end of the assay period, such as Pectinex® 3XL and Celluclast 1.5L®. Whether greater synergy was generated at the start or end of hydrolysis was a function of the stability of the enzymes in solution and whether enzyme activity increased substrate accessibility or generated competition between enzymes in solution. Sequential synergy studies demonstrated an anti-synergy relationship between Pectinex® 3XL and XynA or ManA, as well as Pectinex® 3 XL and Celluclast 1.5L®. It was found that under sequential synergy conditions with Pectinex® 3 XL, XynA and ManA, that anti-synergy could be negated and high degrees of synergy attained when the enzymes were added in specific loading orders and not inhibited by the presence of other active enzymes. The importance of loading order was demonstrated under sequential synergy conditions when XynA was added before ManA followed by Pectinex® 3 XL, which increased the activity and synergy of the solution by 50%. This equates to a 60% increase in reducing sugar release from the same concentrations of enzymes and emphasises the importance of removing anti-synergy relationships from combinations of enzymes. It can be concluded that a C20P60X20 combination (based on activity) can both synergistically increase the reducing sugar production and lower the protein loading required for pineapple pomace hydrolysis. This study also highlights the importance of reducing anti-synergy in customised enzyme cocktails and how sequential synergy can demonstrate the order in which a lignocellulosic waste is degraded.
  • Full Text:
  • Date Issued: 2014

Preparation and evaluation of Lignocellulose-Montmorillonite nanocomposites for the adsorption of some heavy metals and organic dyes from aqueous solution

  • Authors: Bunhu, Tavengwa
  • Date: 2011
  • Subjects: Lignocellulose , Lignocellulose -- Biodegradation , Water -- Purification , Adsorption , Separation (Technology) , Dyes and dyeing , Montmorillonite
  • Language: English
  • Type: Thesis , Doctoral , PhD (Chemistry)
  • Identifier: vital:11333 , http://hdl.handle.net/10353/535 , Lignocellulose , Lignocellulose -- Biodegradation , Water -- Purification , Adsorption , Separation (Technology) , Dyes and dyeing , Montmorillonite
  • Description: The need to reduce the cost of adsorption technology has led scientists to explore the use of many low cost adsorbents especially those from renewable resources. Lignocellulose and montmorillonite clay have been identified as potentially low cost and efficient adsorbent materials for the removal of toxic heavy metals and organic substances from contaminated water. Montmorillonite clay has good adsorption properties and the potential for ion exchange. Lignocellulose possesses many hydroxyl, carbonyl and phenyl groups and therefore, both montmorillonite and lignocellulose are good candidates for the development of effective and low cost adsorbents in water treatment and purification. The aim of this study was to prepare composite materials based on lignocellulose and montmorillonite clay and subsequently evaluate their efficacy as adsorbents for heavy metal species and organic pollutants in aqueous solution. It was also important to assess the adsorption properties of the modified individual (uncombined) lignocellulose and montmorillonite. Lignocellulose and sodium-exchanged montmorillonite (NaMMT) clay were each separately modified with methyl methacrylate (MMA), methacrylic acid (MAA) and methacryloxypropyl trimethoxysilane (MPS) and used as adsorbents for the removal of heavy metals and dyes from aqueous solution. The lignocellulose and NaMMT were modified with MMA, MAA and MPS through free radical graft polymerisation and/or condensation reactions. NaMMT was also modified through Al-pillaring to give AlpMMT. The materials were characterised by fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), scanning electron microscopy (SEM) and small angle X-ray scattering (SAXS) and characterisation results showed that the modification of the montmorillonite with MAA, MMA and MPS was successful. The modified lignocellulose and montmorillonite materials were evaluated for the adsorption of heavy metal ions (Cd2+ and Pb2+) from aqueous solution by the batch method. The adsorption isotherms and kinetics of both Cd2+ and Pb2+ onto the NaMMT clay, AlpMMT and lignocellulose materials are presented. The Langmuir isotherm was found to be the best fit for the adsorption of both heavy metals onto all the adsorbents. AlpMMT showed very poor uptake for heavy metals (both Cd2+ and Pb2+). PMMAgMMT, PMAAgMMT, PMAAgLig and PMPSgLig showed improved adsorption for both heavy metals. The mechanism of heavy metal adsorption onto the adsorbents was best represented by the pseudo second-order kinetic model. PMPSgLig, NaMMT and AlpMMT showed relatively high adsorption capacities for methyl orange, while the adsorption of neutral red was comparable for almost all the adsorbents. Neither the Langmuir model nor the Freundlich model was found to v adequately describe the adsorption process of dyes onto all the adsorbents. The pseudo second-order model was found to be the best fit to describe the adsorption mechanism of both dyes onto all the adsorbents. The modification of lignocellulose and montmorillonite with suitable organic groups can potentially produce highly effective and efficient adsorbents for the removal of both heavy metals and dyes from contaminated water. Novel adsorbent composite materials based on lignocellulose and montmorillonite clay (NaMMT) were also prepared and evaluated for the removal of pollutants (dyes and heavy metals) from aqueous solution. The lignocellulose-montmorillonite composites were prepared by in situ intercalative polymerisation, using methyl methacrylate, methacrylic acid and methacryloxypropyl trimethoxysilane (MPS) as coupling agents. The composite materials were characterised by FTIR, TGA, TEM and SAXS. SAXS diffractograms showed intercalated nanocomposites of PMMAgLig-NaMMT and PMAAgLig-NaMMT, whereas PMPSgLig-NaMMT showed a phase-separated composite and the same results were confirmed by TEM. The lignocellulose-montmorillonite composites were assessed for their adsorption properties for heavy metal ions (Cd2+ and Pb2+) and dyes (methyl orange and neutral red) from aqueous solution. Among these composite materials, only PMAAgLig-NaMMT showed a marked increase in the uptake of both Cd2+ and Pb2+ relative to lignocellulose and montmorillonite when used independently. The adsorption data were fitted to the Langmuir and Freundlich isotherms, as well as to the pseudo first-order and pseudo second-order kinetic models. The data were best described by the Langmuir isotherm and the pseudo second-order kinetic model. On the adsorption of dyes, only PMPSgLig-NaMMT showed enhanced adsorption of methyl orange (MetO) compared with lignocellulose and montmorillonite separately. The enhanced adsorption was attributed to the synergistic adsorption due to the presence of MPS, lignocellulose and NaMMT. Competitive adsorption studies were carried out from binary mixtures of MetO and Cd2+ or Pb2+ in aqueous solution. The adsorption process of MetO onto the composite material was found to follow the Freundlich adsorption model, while the mechanism of adsorption followed both the pseudo first-order and pseudo second-order models. This particular composite can be used for the simultaneous adsorption of both heavy metals and organic dyes from contaminated water. The adsorption of neutral red to the composite materials was comparable and the pseudo second-order kinetic model best described the adsorption mechanism.
  • Full Text:
  • Date Issued: 2011

The microbial ecology of sulphidogenic lignocellulose degradation

  • Authors: Clarke, Anna Maria
  • Date: 2007
  • Subjects: Microbial ecology , Lignocellulose , Sulfides , Lignin , Lignocellulose -- Biodegradation , Mines and mineral resources -- Waste disposal , Acid mine drainage
  • Language: English
  • Type: Thesis , Doctoral , PhD
  • Identifier: vital:4094 , http://hdl.handle.net/10962/d1008181
  • Description: Acid mine drainage is a well known environmental pollutant, not only in South Africa, but throughout the world, and the use of microbial processes in the treatment of these wastes has been the subject of investigation over past decades. Lignocellulose packed-bed reactors have been used in passive treatment systems, and, although effective initially, they show early decline in performance while the packing material remains largely un-utilized. Little is known about this phenomenon which remains a severe constraint in the development of efficient passive mine water treatment systems. It has been proposed that the degradation pathways of the complex lignocellulose substrate may be limited in some way in these systems during the manifestation of this effect. This study has addressed the problem using a molecular microbial ecology methodology in an attempt to relate trophic functions of the microbial population to the physico-chemical data of the system. A field-scale lignocellulose packed-bed reactor located at Vryheid Coronation Colliery (Northern Kwa-Zulu Natal province, South Africa) was monitored for six years and the results showed the classic profile of performance decline related to a slowdown in sulphate reduction and alkalinity production. The reactor was decommissioned , comprehensive samples were collected along the depth profile and the microbial populations investigated by means of 16S rRNA gene methodology. The population was found to include cellulolytic Clostridia spp., CytophagaIFlavobacterlBacteroidetes, Sphingomonadaceae and as yet uncultured microorganisms related to microbiota identified in the rumen and termite gut. These are all known to be involved as primary fermenters of cellulose. Oesulphosporosinus was present as sulphate reducer. A comparison of substrata sampling and population distribution suggested that spatial and temporal gradients within the system may become established over the course of its operation. Based on these findings, a laboratory-scale reactor was constructed to simulate the performance of the packed-bed reactor under controlled experimental conditions. The laboratory-scale reactor was operated for 273 days and showed comparable performance to that in the field in both biomolecular and physicochemical data. Clearly defined trophic niches were observed. These results suggested that a sequence of events does occur in lignocellulose degradation over time. Based on the spatial and temporal column studies, a descriptive model was proposed to account for these events. It was found that fermentative organisms predominate in the inlet zone of the system using easily extractable compounds from the wood, thus providing feedstock for sulphate reduction occurring in the succeeding compartments. Production of sulphide and alkalinity appears to be involved in the enhancement of lignin degradation and this, in turn, appears to enhance access to the cellulose fraction. However, once the readily extractables are exhausted, the decline in sulphide and alkalinity production leads inexorably to a decline in the overall performance of the system as a sulphate reducing unit operation. These observations led to the proposal that with the addition of a limited amount of a readily available carbon source, such as molasses, in the initial zone of the the reactor, the ongoing generation of sulphide would be sustained and this in turn would sustain the microbial attack on the lignocellulose complex. This proposal was tested in scale-up studies and positive results indicate that the descriptive model may, to some extent, provide an account of events occurring in these systems. The work on sustaining lignocellulose degradation through the maintenance of sulphate reduction in the initial stages of the reactor flow path has led to the development of the Degrading Packed-bed Reactor concept and that, has subsequently been successfully evaluated in the field.
  • Full Text:
  • Date Issued: 2007
  • 1
  • Disclaimer
  • Privacy
  • Copyright
  • Contact